Dish Network 942 - Manual (Page 30)

Satellite Receiver
23
Satellite Receiver Back Panel
S
ATELLITE
R
ECEIVER
B
ACK
P
ANEL
Feature Name and Description
1 Connect the UHF antenna to this port to receive UHF Pro signals
from the Remote Control 2 so that it can control TV2 menus from
another room. See page 17 for more information. The Remote
Antenna port is color coded green.
2
Connect an off-air antenna to this port using a coaxial cable to
enable TV1 to receive digital and analog broadcasts from your off-
air antenna. You can also connect analog cable service to this port
for display on TV1. The 8VSB TV ANTENNA/CABLE IN port is
color coded black.
3
The YPbPr connection provides a good video output for high
definition viewing. Use a YPbPr cable to make this connection to
your HDTV or HD monitor. The cable is color coded to match the
connections on your receiver and your TV. If you use this output
for video, you must still connect the audio with the Audio Outputs
or the Digital Audio Output.
4
The HDTV Digital A/V OUTPUT provides the best digital audio
and video signal to a compatible HDTV or HD monitor.
5
The USB Port is reserved for future use. When available, connect
your PocketDISH (sold separately) to this port.
6
Both Satellite IN connections are used to receive satellite TV
signals from the dish antenna. The connection is made using RG-
6 coaxial cable. The Satellite In connections are color coded blue.
Chapter 2 Two Color.fm Page 23 Tuesday, June 7, 2005 12:52 PM