Dish Network 942 - Manual (Page 79)

Chapter 9
72
Setting Up an Automatic Timer
1
Press MENU and select Daily Schedule (7).
2
Use the ARROWS to select a future program if you want to Skip or Restore a timer. You
can also choose to Protect it, or view the start early/end late settings.
• To change the start early/end late setting, select the event within the Timers List.
• If the program is a DISH Pass timer, you cannot change the start early or end late
times on an individual program; it must be changed on the DISH Pass timer, from the
Timers List.
• Press PAGE UP to see the previous days' timers. Review these timers if you want to
see the result of your timers (e.g. if it recorded successfully or why it might have been
skipped).
S
ETTING
U
P AN
A
UTOMATIC
T
IMER
You can create an automatic timer for a future event. The following instructions explain the
simplest way to set up an automatic timer.
1
Find the program that starts in the future to record using the Program Guide or Browse
Banner. The program can be a satellite or off-air program (see page 116 for instructions on
connecting an off-air antenna to your receiver). Note that this feature may not work with all
off-air channels.
2
Select the future event. The Create Timer screen displays.
3
Select the Timer Frequency (see page 68 for more details).
4
Select a Timer Type (see page 68 for more details).
5
Select Options (see page 69 for more details).
6
Select Set Priority if you would like to change the priority of the timer (see page 68 for
more information).
7
Select Create Timer to finish making the new timer.
Chapter 8 Two Color.fm Page 72 Tuesday, June 7, 2005 1:12 PM