Dish Network 942 - Manual (Page 25)

Chapter 2
18
Remote Control
Remote Control Buttons
The following describes how the buttons work in SAT mode. For information on controlling
other components, see Using the Remote Control with Other Components on page 81.
Button Description
1 The remote control’s MODE buttons are used to set the remote control
to operate one of four devices: SAT (satellite receiver), TV (for a TV),
VCR (for a VCR or a DVD player), and AUX (“auxiliary,” for a second
TV, a VCR, a tuner, an audio amplifier, or a second satellite receiver).
Press the button for the device you want the remote to control. The
mode button lights for two seconds to show you’ve set the remote to
that mode. Be sure to program the remote to control the other
components as described on page 81.
2
Press POWER to turn the receiver on or off.
3 Press TV POWER to turn the TV on or off. Be sure to program the
remote to control a TV to use this button. See Controlling Other
Components on page 81.
4
Press MENU to open the Main Menu.
5
Press MUTE to turn off the TV sound. Press it again to restore the TV
sound to the previous level. Be sure to program the remote to control a
TV to use this button. See Controlling Other Components on page 81.
6
Press PAGE UP or PAGE DOWN to move, page by page, through the
Program Guide, a Theme list, a Favorites List, an Event Timers list, a
DVR Events list, or a list of channels.
7
Press VOLUME to raise and lower the volume of the TV. Be sure to
program the remote to control a TV to use this button. See Controlling
Other Components on page 81.
Chapter 2 Two Color.fm Page 18 Tuesday, June 7, 2005 12:52 PM