Dish Network 942 - Manual (Page 29)

Chapter 2
22
Satellite Receiver Front Panel
S
ATELLITE
R
ECEIVER
F
RONT
P
ANEL
Feature Description
1
Behind this door is a slot for a future smart card. No smart card is
included with this receiver.
2
The Mode lights indicate if the receiver is in Single or Dual mode (see
page 13 for details).
3 The green TV1 light indicates that the receiver is providing
programming to the nearby HDTV through the TV1 output
connections. The red Record light indicates that the receiver is
recording using TV1.
4 The blue TV2 light indicates that the receiver is providing
programming to the remote TVs through the TV2 output connections.
The red Record light indicates that the receiver is recording using
TV2.
5
Use ARROWS to navigate and select TV1 menu items and to change
satellite channels displayed on the nearby HDTV. Press SELECT to
choose TV1 menu items.
6 Press INFO to display information about a TV1 program you are
watching, or when you have the Program Guide, Browse Banner, or
Themes list open.
7 Press POWER to turn the TV1 programming on or off to the nearby
HDTV.
8
Press MENU to Display the TV1 Main Menu.
9
Press SYSTEM INFO to display the System Info screen on the
nearby HDTV.
10
The Infrared (IR) Sensor receives IR signals from Remote Control 1.
11
The USB Port is reserved for future use. When available, connect
your PocketDISH (sold separately) to this port.
12 Press MODE to switch between Single and Dual modes (see page 13
for details).
Chapter 2 Two Color.fm Page 22 Tuesday, June 7, 2005 12:52 PM