Nortec ME Control User Manual
Page 60
60 Maintenance
6.10 Resetting the maintenance indication on Nortec ME Control
After completing maintenance work, the maintenance indication or the maintenance counter, respectively
must be reset. Proceed as follows to reset the maintenance counter:
1. Select in the “Service” submenu the function “System Service Reset”
2. The reset dialogue appears in the display:
•
If the maintenance work has been completed, press the <Yes> button to reset the mainte-
nance counter or the maintenance indication, respectively. The maintenance counter and
the
maintenance indication are reset and the control unit is restarted.
• if the maintenance work has not been completed, press the
<No> button and you want abort the
reset procedure. The control unit returns to the “Service” submenu.
Password:
8808