Nortec ME Control - Manual (Page 8)

8 For your safety
Danger that may arise from the Nortec ME Control
DANGER!
Risk of electric shock!
The Nortec ME control unit (and the optional submerged UV system) contain live mains voltage.
Live parts may be exposed when the control unit (or the terminal box of the optional submerged
UV system) is open. Touching live parts may cause severe injury or danger to life.
Prevention: Before carrying out any work on the Nortec ME Control switch off the control unit, dis-
connect it from the mains via the electrical isolator and secure the electrical isolator in “Off” position
against inadvertent power-up.
DANGER!
Health risk because of inadequate hygiene!
Inadequately operated and/or poorly maintained evaporative humidification/cooling systems may en-
danger health. When inadequately operated and/or poorly maintained micro-organisms (including the
bacterium which causes Legionnaire’s disease) may grow in the evaporative module, the water tank
and the water system of the Nortec ME Control and may affect the air in the AHU/air duct.
Prevention: the Nortec ME Control must strictly be operated and maintained in accordance with this
manual.
WARNING!
Some type of e vaporative material is manufactured from glass fibre. Though this material is not classi-
fied as hazardous, it is recommended that Personal Protection Equipment such as gloves, protective
clothing and eye protection are used during handling to protect the user from fibres or dust. If dust is
generated during handling it is recommended that respiratory protection is worn.
Correct lifting and handling
Lifting or handling of components must only be carried out by trained and qualified personnel. Ensure
that the lifting operation has been properly planned and risk assessed, and that all equipment has been
checked by a skilled and competent Health & Safety representative.
It is the customer's responsibility to ensure that operators are trained in handling heavy goods and to
enforce the relevant lifting regulations.