Thinklogical X4 Configurator Manual - Manual (Page 10)

X4 Configurator Manual 10 October, 2012
ADMIN :
Routers
On the ADMIN page, the Routers tab allows you to configure X4Configurator for your routers. The router
(or router simulator program) must be already running and on the network. The setup process will attempt
to communicate with the router over the network and will fail if the router does not respond or is a
different type than the one you selected.
If this is a fresh install, there will be no routers declared yet. Click on the gray row beneath the column
header “Router Name:” and enter the name you will use for your router. If you click on the entries for the
remaining fields, you will be offered pop-up lists of choices. For this example, we will use a VX80.