Thinklogical X4 Configurator Manual - Manual (Page 7)

X4 Configurator Manual 7 October, 2012
If this is the first installation, then leave all the checkboxes checked. However, if this is an update from an
earlier version, you can safely uncheck the first two boxes for “Install Python2.6” and “Install Python
win32 extensions” as they will already be on your computer. Click Install.
Click “Yes”.
Please note the last five rows. The fifth from the bottom should read “Creating X44 returned 0” and the
second from the bottom should read “Starting X44 returned 0”. If either of these lines does not show
“returned 0”, then a problem was encountered during installation and X4 will not work.