Thinklogical X4 Configurator Manual - Manual (Page 30)

X4 Configurator Manual 30 October, 2012
To create a new snapshot with your own title, either select the most recent automatic snapshot from the
drop-down list and give it your own name or pull down to the last option and select “Create New
Snapshot”.
To give it a new name, click the “Press to Record” button and the new snapshot is created.
NOTE: There is one last important point to remember about snapshots:
When a snapshot is executed, each router will first disconnect every port and then proceed to reconnect
only the ports that were connected when the snapshot was recorded. This means that every screen will
first go dark and then be reconnected the way the snapshot recorded it.