Thinklogical X4 Configurator Manual User Manual
Page 27
Advertising
![background image](/files/807746/content/doc027.png)
X4 Configurator Manual
27
October, 2012
Return to
ADMIN
:
Tie Lines
.
Note that only the tie line from B to A is in use. Now return to the
CONNECT
page (for which you
probably have kept a browser tab open) and connect another B source to another A destination.
The red message “No path available” will appear for a few seconds and then disappear whenever there are
not enough tie lines to complete the desired connection.
Advertising