Thinklogical X4 Configurator Manual - Manual (Page 17)

X4 Configurator Manual 17 October, 2012
Adding New Ports
If your sources and destinations have more than two heads, additional port columns can be added. Right
click on the existing L3: column header and select Append from the Column pop-up.
A new L3: column appears. Left click on the new L3: header and select L4:
The column will be renamed.
However, we don’t need extra signals right now, so click the Cancel button (not SAVE ).
At this point, we have a router and some stations defined, so X4 can make connections between sources
and destinations. To see how this is done, proceed to the
CONNECT Page in this manual.