Verilink 2000 (34-00182) Product Manual - Manual (Page 10)

1-6 G ENERAL
The remedies listed herein are the users sole and exclusive remedies. TxPORT
shall not be liable for any indirect, direct, incidental or consequential damages.
The owner must return the unit to the factory, shipping prepaid and packaged to
the best commercial standard for electronic equipment. TxPORT will pay shipping
charges for delivery on return. The customer is responsible for mode and cost of
shipment to TxPORT. This warranty does not apply if the unit has been damaged
by accident, misuse or as a result of service or modification by other than TxPORT
personnel.
Ordering
Numbers The unit is shipped from the factory with the 2000 CSU reference manual and a
6-pin modular cable from NMS IN to NMS OUT. Refer to Table 1-2 for the
optional equipment part numbers.
The part numbers for the stand- alone unit and the modular chassis unit are shown
in Table 1-1.
For example, the default part number for the stand-alone unit is F-2000-100-111.
This is a unit with RJ-48C backplane connectors for both the network and DTE.
Table 1-1 PRISM 2000 Unit Option Numbers
Part Number Description
F-2000-100-1SC
C
1
2
3
S
1
2
2000 ESF CSU Stand-alone Unit
Backplane option
RJ-48C NET/RJ-48C DTE
RJ-48C NET/DB-15 DTE
DB-15 NET/DB-15 DTE
Surge-protection option
No surge protection
Surge protection
F-2000-101-1SD
D
1
2
3
S
1
2
2000 ESF CSU Module (chassis)
Chassis option
1051 chassis
Telco chassis
K-type chassis
Surge-protection option
No surge protection
Surge protection