Verilink DCSU 2911 (880-502647-001) Product Manual - Manual (Page 22)

DCSU 2911 Quick Set-Up
2-8 Verilink DCSU 2911 User Manual
Type “3” to select the now configured Net Port 3 (Equipment
Port 1). The prompt will display:
Enter the destination port (1-4 or 'A' for all): Enter the destination port (1-4 or 'A' for all): Enter the destination port (1-4 or 'A' for all): Enter the destination port (1-4 or 'A' for all):
Type “4” to select Net Port 4 (Equipment Port 2).
Are you sure to copy port 1 to port 2? (y/n) Are you sure to copy port 1 to port 2? (y/n) Are you sure to copy port 1 to port 2? (y/n) Are you sure to copy port 1 to port 2? (y/n)
Type “Y” for yes. The following prompt will display.
Copying port 3 to port 4 Copying port 3 to port 4 Copying port 3 to port 4 Copying port 3 to port 4
Your DCSU 2911 is now configured and ready to be placed into
service by connecting the unit to the appropriate cables to the
network and to your equipment.
The LEDs should all be lit green to indicate that all is well and that
there are no alarms. If any of the LEDs are not green, see Chapter 5,
“Troubleshooting” for more information.