Verilink DCSU 2911 (880-502647-001) Product Manual - Manual (Page 42)

DCSU T1 Craft Interface
3-20 Verilink DCSU 2911 User Manual
Net Port Alarm
Threshold
Configuration
Submenu
To display the Net Port Alarm Threshold Configuration
Submenu, type the command C from the Net Port Alarm Menu.
Figure 3-13 DCSU 2911 Net Port Alarm Threshold Configuration Menu
Configure
Thresholds
While the Performance/Status Menu reflects industry standard
thresholds, you can use the Net Port Alarm Threshold
Configuration Menu to set your own alarm thresholds and
intervals.
To view and modify your alarm thresholds, enter C from the Net
Port Alarm Menu. The Net Port Alarm Threshold Configuration
Menu appears. Use this menu to set the monitoring interval for
several types of alarms and the alarm threshold for errored
seconds within the monitoring interval.
For example, if the LOF interval is set to 100 seconds, and the LOF
threshold is set to 5 seconds, then an alarm will be sent if more
than 5 LOF errored seconds occur during a 100-second interval.
The errored count is reset to zero after the end of the interval,
unless there is an alarm condition and the first second of the next
interval is also errored. In this case, the alarm state will continue
until a new interval contains no errors during the first second.
NOTE: To disable any or all alarm conditions, enter a threshold value of 0.
To enable a condition, specify any non-zero threshold value. Figure
3-13 , Net Port Alarm Threshold Configuration Menu, presents the
default values for all the alarm conditions.
-- DCSU 2911 NET PORT ALARM THRESHOLD CONFIGURATION MENU --
PORT 1 PORT 2 PORT 3 PORT 4
Pn) Alarm Reporting NO NO NO NO
Fn) LOF threshold 3 3 3 3
LOF interval 3 3 3 3
Ln) LOS threshold 3 3 3 3
LOS interval 3 3 3 3
Rn) RAI threshold 1 1 1 1
RAI interval 1 1 1 1
An) AIS threshold 1 1 1 1
AIS interval 1 1 1 1
Bn) BPV threshold 1 1 1 1
BPV interval 1 1 1 1
En) ES 15min threshold 900 900 900 900
ES 24hr threshold 86400 86400 86400 86400
Sn) SES 15min threshold 900 900 900 900
SES 24hr threshold 86400 86400 86400 86400
In) BER threshold DISABLE DISABLE DISABLE DISABLE
X) exit this screen
[1,1] DCSU 2911 >