Verilink Red Zone Encryption (REMS) (880-502423-001) Product Manual - Manual (Page 75)

Calling up AM2000 performance displays
Red Zone Encryption Management System (REMS) User Manual 7-5
Figure 7-4 Retrieve Performance Data Menu
5. Select the type of report you wish to see. The following reports are
available in REMS:
• USER data reports: selections A and E.
In REMS, USER data maps to the RCV signal at the near-end
BRC (point A). (See Figure 7 -2, Origination and Flow of
Performance Data in a REMS Network.)
• TELCO is the same as USER except that it is usually accessed
only by the Telco.
• EQP (Equipment) reports: C and G.
In REMS, EQP data maps to far-end network performance,
relayed via PRMs from far-end BRC.
In response to your selection, the Node Selection Menu appears.
6. Select the near-end REMS node.
The network performance display appears for the type of report you
have selected. (For further details and illustrations of report display
screens, see Access Manager 2000 User Manual.)