Watson-Marlow Qdos30 - Manual (Page 25)

Watson-Marlow qdos30 PROFIBUS Pump User Manual 25
14.3 Manual
All settings and functions of the pump in manual mode are set and controlled by
means of key-presses. Immediately after the start-up display sequence detailed in:
Section 13 Switching the pump on in subsequent power cycles on page 24, the
manual mode home screen will be displayed unless auto restart is enabled.
If enabled, the pump will return to the last known operating state when the power
was lost. When the pump is running it displays an animated clockwise arrow. In
normal operation, the direction of flow is into the bottom port of the pumphead and
out of the top port.
If an exclamation mark (!) is displayed, it indicates that Auto restart is on (see 16.3
General settings on page 24). If a padlock icon shows, it indicates that the keypad
lock is on.
START
Starts the pump at the current flow displayed, and the display background changes
to blue. If the pump is running pressing this has no effect.
STOP
Stops the pump. The display background changes to white. If the pump is not running
pressing this has no effect.