Watson-Marlow Qdos30 - Manual (Page 28)

Watson-Marlow qdos30 PROFIBUS Pump User Manual 28
14.5 PROFIBUS mode
In this operating mode PROFIBUS control can be enabled or disabled. The Qdos 30
PROFIBUS pump is designed so that the station address can only be set from the
pump. The user can set the station address within this mode.
Select MODE
Using the +/- keys scroll to PROFIBUS and press SELECT
If PROFIBUS is not enabled, the screen below will prompt you to CONFIRM that you
would like to enable PROFIBUS
On the PROFIBUS home screen the white P icon indicates that there is data exchange
Pressing the INFO function key will display further information