Watson-Marlow Qdos30 - Manual (Page 9)

Watson-Marlow qdos30 PROFIBUS Pump User Manual 9
The exterior surfaces of the pump may get hot during operation.
Do not take hold of the pump while it is running. Allow the to
pump cool after use before handling. The drive unit must not
be run without a pumphead fitted. The pumphead should not be
run dry for extended periods of time. The pump should not be
used to pump fluids where the temperature of the fluid can reach
temperatures of more than 70C.
Ensure the chemicals to be pumped are compatible with the
pumphead, lubricant, tubing, pipework and fittings to be used
with the pump. Please refer to the chemical compatibility guide
which can be found at: www.wmpg.com/chemical If you need to
use the pump with any other chemical please contact Watson-
Marlow to confirm compatibility.