Watson-Marlow Qdos30 - Manual (Page 63)

Watson-Marlow qdos30 PROFIBUS Pump User Manual 63
19 Ordering information
19.1 Pump part numbers
Plug options
A: US
E: European
U: UK
K: Australia
R: Argentina
C: Swiss
Pumphead
orientation*
L = Left
R = Right
Model
1: Remote
3: Manual
4: Universal
5: Universal+
7: PROFIBUS
Tube material †
2: Santoprene (max 7 bar, 100 psi)
8: SEBS (max 4 bar, 60 psi)
Digital I/O type
Manual, Remote and PROFIBUS models
L: Standard pump variant
Universal and Universal+ models
L: Open collector outputs, 5 - 24V DC inputs
H: Volt free 110V AC relay contacts, 110V AC inputs
(only available with US mains leads)
R: Volt free 24V DC relay contacts, 5 - 24V DC inputs
M 2 • • • • • 0 0 2
Pumphead Lubricant
G: General purpose, PFPE lubricant
X: Glycerol lubricant
* The pumphead side location is required when ordering. The left/right
perspective assumes the user is looking at the front of the pump. The pump
in the dimensions diagram is considered a pumphead located to the left.
** Important note - The ReNu Pumphead contains lubricant. It is the user’s
responsibility to comply with local health and safety regulations, including ensuring
chemical compatibility between the lubricant and the duty fluid before use. The
standard lubricant is silicone oil. A glycerol/glycol blend lubricant is also available
as an option.
† To choose the best tube for your duty fluid please use the chemical compatibility
chart at www.qdospumps.com