2 spares and accessories – Watson-Marlow Qdos30 User Manual
Page 64
Watson-Marlow qdos30 PROFIBUS Pump User Manual
64
19.2 Spares and accessories
Description
Part number
ReNu pumphead (PFPE lubricant)
0M3.2200.PFP
Hydraulic connection pack, polypropylene compression fittings
0M9.221H.P01
Hydraulic connection pack, polypropylene
barb/threaded fittings
0M9.221H.P02
Interface tubing, pvc 6.3x11.5mm, 2m (6.5ft) length
0M9.2222.V6B
Interface tubing, pvc 10x16mm, 2m (6.5ft) length
0M9.2222.VAD
Interface tubing, pvc 6.3x11.5mm, 5m (16ft) length
0M9.2225.V6B
Interface tubing, pvc 10x16mm, 5m (16ft) length
0M9.2225.VAD
Interface tubing, polyethylene 9x12mm, 2m (6.5ft) length
0M9.2222.E9C
Interface tubing, polyethylene 5x8mm, 2m (6.5ft) length
0M9.2222.E58
Interface tubing, polyethylene 9x12mm, 5m (16ft) length
0M9.2225.E9C
Interface tubing, polyethylene 5x8mm, 5m (16ft) length
0M9.2225.E58
Replacement baseplate
0M9.223M.X00
Input lead, M12 IP66, 3m (10ft) length
0M9.203X.000
Output lead, M12 IP66, 3m (10ft) length
0M9.203Y.000
HMI protective cover
0M9.203U.000
Hydraulic spares kit, Viton O-rings, connection collars
SK 9001
Pumphead orientation
Please refer to the following guidelines to ensure that you order the correct pumphead
for your pump.
As you face the front of the pump, looking at the HMI (not the remote model) and
I/O connections:
• A pumphead mounted on the pump housing to the left will be a left hand pumphead.
• A pumphead mounted on the pump housing to the right will be a right hand
pumphead.
Pumphead
retaining clamps
Left hand
mounted
pumphead