Watson-Marlow SPS - Manual (Page 22)

MasoSine SPS sinusoidal pumps User Manual 22
10 Transport
Choose the means of transport according to the size of the pump and the drive. The
pump must be suspended correctly for transport. If using a crane or a fork-lift truck,
the ropes or belts must be sufficiently dimensioned. If the pump is transported with
a lift truck or a fork-lift truck, note that the unit’s centre point is not necessarily the
centre of gravity.
11 Installation
The motor shaft and pump shaft connection must be guarded to protect the
user from contact.
l Place the pump on a level surface.
l Do not start the pump without a guard to protect the user from contact.
l The mounting surface should be strong enough to support the pump.
l There should be sufficient space for maintenance work around the pump.
l The motor must receive an adequate air supply.
l If the pump is used in potentially explosive atmospheres, an Ex-protected
motor must be used. Contact the manufacturers for assistance.
l The unit must be protected against static charge.
7
7
7
3
7
3
3