Watson-Marlow SPS - Manual (Page 77)

MasoSine SPS sinusoidal pumps User Manual 77
Fitting the front liner
l Push the front liner into position, pushing evenly at both ends so that it does
not jam. The anti-rotation pins within the pump housing (arrowed) guarantee
that the liner is properly positioned. The two liners are identical.
Fitting the front support
l Position the PEEK front support, castellations first, it its recess in the front
cover (the side with slots must face the front cover).
l Check that the front cover O-ring (arrowed) is in its groove in the front cover.
The PEEK front support
Stainless steel front support
SPS 200 pumps