Watson-Marlow SPS - Manual (Page 53)

MasoSine SPS sinusoidal pumps User Manual 53
l Use a 22mm spanner to remove the cap nuts (right-hand thread) and
washers.
l Lightly tap the two front cover pins if necessary and use them to pull off the
cover.
Removing the front cover
22.3.1 Dismantling the SPS 200
Note: The pictures show a pump with a cast iron power frame. Dismantling
models with stainless steel power frame is similar. For exceptions, see page 62.
SPS 200 pumps
22.3 Dismantling and assembling the
SPS 200
Removing the front support, PEEK or stainless steel
The PEEK front support The stainless steel front support