WattMaster WCC III part 4 - Manual (Page 107)

WCC III Technical Guide 3-103
WCC3.EXE SCREEN DESCRIPTIONS
The units selected will appear for the consumption since last reset
and also for the monthly consumption. The maximum value of
9999 for monthly consumption should be taken into consideration
when selecting units. The signifi cant fi gures will be adjusted as
different choices are selected. For example, if you have a present
value of 5428 KWH, and you change the units from KWH to
HKH, 54 HKH will appear on the screen. If you then change back
to KWH, 5400 KWH will appear.
Demand From: GA 0
If you would like to average the kwh of the building using the
sliding window feature of the analog globals, enter the number of
the analog global which has the building kwh. If you want to read
the kwh from the satellite controller directly, enter GA0.
Energy Consumption History
The system will automatically show what the consumption (kwh)
and demand (KW) is for today, yesterday, this month, and last
month. The system will also show the time and date when the peak
occurred.
<Consumption> <Demand>
You may select either Consumption or Demand by placing the
cursor in this fi eld, pressing the
<space bar> until the desired
word appears and then pressing <Enter> .
<Past 60 Days> <Past 12 Months>
You may also choose to display the past 60 days of data or the past
12 months by pressing the
<space bar> until the desired choice
appears and then pressing <Enter> .
You may move the cursor down into the consumption or demand
table and manually enter the KWH demand for certain days or
months.
Energy Consumption Screen
KWH = 1 KWH
DKH = 10 KWH
HKH = 100 KWH
MWH = 1,000 KWH
DMH = 10,000 KWH
HMH = 100,000 KWH
GWH = 1,000,000 KWH
DGW = 10,000,000 KWH
5428 KWH will appear as 543 DKH
5428 KWH will appear as 54 HKH, etc.