WattMaster WCC III part 4 - Manual (Page 73)

WCC III Technical Guide 3-69
WCC3.EXE SCREEN DESCRIPTIONS
SAT Trend Log
Specifi es the summary type to be displayed. Because this is a
“choice” fi eld, the list of available choices will be displayed at the
bottom of the screen:
<Analog Input, Control Output, Analog Output,
Trend Logging, Logic Switch, Binary Output>
Make your selection by pressing the <space bar> once for each
choice until the desired summary type has been selected, and then
press
<Enter> . (If you select a summary type that is different
than that being displayed, the screen will be rewritten with the
appropriate information.)
Satellite ______
Specifi es the number of the satellite which you are currently
communicating with. If you would like to view the trend log
summary data for a different satellite, simply position the cursor to
this fi eld using the arrow keys, enter the desired number, and press
<Enter> . To view or edit a specifi c trend log, simply position the
cursor (shown as “>“) using the arrow keys to the desired point,
and press
<Enter> . The Trend Log Screen for the desired point
will appear.
Trend Logging Satellite # 1 Sat.#1 Time Date
09:08 01/20
CHANGE OF STATE RUN TIME TOTAL
Point Description Last change Point Description Current Val Alarm Limit
T1c: S1-K1h 16:23 12/09 T1r: S1-K1h 1870 Hours 5000 Hours
T2c: S1-K2h 8:33 12/10 T2r: S1-K2h 868 Hours 5000 Hours
T3c: S1-K3h 16:23 12/09 T3r: S1-K3h 1870 Hours 5000 Hours
T4c: S1-K4h 16:23 12/09 T4r: S1-K4h 1870 Hours 5000 Hours
T5c: S1-K5h 16:23 12/09 T5r: S1-K5h 1870 Hours 5000 Hours
T6c: S1-K6h 08:59 01/12 T6r: S1-K6h 1678 Hours 5000 Hours
T7c: S1-K7h 16:23 12/09 T7r: S1-K7h 1870 Hours 5000 Hours
T8c: S1-K8h 16:23 12/09 T8r: S1-K8h 1870 Hours 5000 Hours
ANALOG TREND ANALOG PEAK
Point Description Last Sample Point Description Low High Units
T1a: S1-A1
50.0 Deg F T1p: S1-A1 0.0 50.0 Deg. F
T2a: S1-A2 0 Deg. F T2p: S1-A2 0.0 0.0 Deg. F
T3a: S1-A3 0 Deg. F T3p: S1-A3 0.0 0.0 Deg. F
T4a: S1-A4 0 Deg. F T4p: S1-A4 0.0 0.0 Deg. F
T5a: S1-A5 0 Deg. F T5p: S1-A5 0.0 0.0 Deg. F
T6a: S1-A6 0 Deg. F T6p: S1-A6 0.0 0.0 Deg. F
T7a: S1-A7 9.0 Deg. F T7p: S1-A7 0.0 9.0 Deg. F
T8a: S1-A8 99.0 Deg. F T8p: S1-A8 0.0 99.0 Deg. F
SAT TREND LOG SUMMARY SCREEN
Time / Date
The present time and date will automatically appear at these
locations.
Point
The system automatically displays the “name” of each of the trend
log points.
T = Trend Log
1 - 8 = The number of the trend log
c = Change of State
r = Run Time
a = Analog Trend
p = Analog Peak
Description
The message which is entered on the specifi c Trend Logging
Screen is automatically displayed here to help you identify the
different trend logs within the system.
Each of the trend log modes have a heading such a “Last Change,”
“Current Value,” etc. The most recent value of the individual trend
logs will automatically be displayed here.
SAT Trend Log Summary Screen
Satellite Trend Log Summary Screen’s WCC III Logical Address is XXXTYc, where XXX = Satellite Address #, T = Trend Log,
Y = Point Number, c = Change of State