Westermo ID-90 - Manual (Page 18)

18 6607-2204
Default setting from ID-90 database is used S4 –
Related
AT-command
ON
1 2 3 4 5 6 7 8
1200 bit/s S4 ATN1
ON
1 2 3 4 5 6 7 8
2 400 bit/s S4 ATN2
ON
1 2 3 4 5 6 7 8
4 800 bit/s S4 ATN3
ON
1 2 3 4 5 6 7 8
9 600 bit/s S4 ATN4
ON
1 2 3 4 5 6 7 8
19 200 bit/s S4 ATN5
ON
1 2 3 4 5 6 7 8
Line baudrate at V.110
The ID-90 DIP-switches will be read at Power on and override the current database set-
ting. If an AT-command or Configurator command given after Power on addressing the
same parameter as a DIP-switch setting the command will in turn override the DIP-switch
setting.
A Save command AT&W will store the current configuration set by DIP-switches or
configuration commands.
Factory settings
S1
ON
1 2 3 4 5 6 7 8
S2
ON
1 2 3 4 5 6 7 8
S3
ON
1 2 3 4 5 6 7 8
ID-90 V.90
S4
ON
1 2 3 4 5 6 7 8
S1
ON
1 2 3 4 5 6 7 8
S2
ON
1 2 3 4 5 6 7 8
S3
ON
1 2 3 4 5 6 7 8
ID-90
S4
ON
1 2 3 4 5 6 7 8