Westermo ID-90 - Manual (Page 95)

95 6607-2204
No. Restart- Clear- Reset- Diag- Meaning
hex ind. ind. ind. nostics
43 – X – – Invalid called DTE address
44 – X – X Invalid calling DTE address
45 – X – – Invalid facility/registration length
46 – X – – Incoming call barred
47 – X – – No logical channel available
48 – X – – Call collision
49 – X – – X.25: repeated facility request
X-75: missing transit DNIC
4A – X – – Non zero address length
4B – X – – Non zero facility length
4C – X – – Facility not provided when expected
4D – X – – Invalid CCITT-speciffied DTE-facility
4E – X – – max. number of call redirections or call deflections
exceeded
51X X X – Improper cause code from DTE
52 – X X – Not aligned octet
53 – – X – Inconsisstent Q bit setting
54 – X – – NUI problem
61– X – – DNIC not accessable
62 – X – – Unknown transition DNIC
64 – X.75 – – Wrong use of facility
65 – X – – Erroneous length of Net-Indicator
66 – X – – Length of Net-Indicator not equal zero
67 – – X – Erroneous M-Bit
71– X X – Problem concerning remote net
72 – X X – International net problem
73 – X PVC – Transmission section out of operation
74 – X PVC – International line engaged
75 – X PVC – Error in the transit net
76 – X – – Error in the destination net – invalid facility found
78 – X – – Temporary routing problem
79 – X – – Unknown called DNIC
7A – X X – Service
80 – – X – Erroneous Q-Bit or
80 – X X – No operation means available
81– X – – Single packet not agreed upon or
81– X X – Temporarily out of operation
82 X X X – Cause-flied not equal 00 (hex.) or
82 – X X – Closed by service provider, e.g. DATEX-P
83 – X PVC – Incompatible paket length
Table 5 cont.