Westermo ID-90 - Manual (Page 74)

74 6607-2204
cha – Charging information
Charging account of the last connection (in units)
chatol – Charging information total
Accumulated charging information (in units)
= 0: Reset charging info.
The charging information is automatically stored to non volatile ram.
chappwd – Set password for PPP chap authorisation
Enable ML-PPP CHAP authorisation by setting the password corresponding to the user
name used for the PPP connection. If the server does not handle CHAP an automatic fall-
back to PAP is performed.
chappwd=<password> set password for CHAP
Note: Since the password is shown in plain text it may be disclosed
by unauthorised persons.
cipm – cip value mask
Selects the bearer services that can be accepted with an incoming call. The definition of
hbhbhbhb (double word) is the CIP mask as defined in the CAPI2.0 specification
(default 00010016h).
Example: cipm=00010016: Accept analogue incoming calls
cipm=00000001: Accept all incoming calls.
See also AT command AT#C1.
cipo – cip value outgoing
Selects the bearer service that will be sent with an outgoing call.
The value for hbhb (word) is the CIP value as defined in the CAPI 2.0 specification
(default 0002h).
Example: An outgoing call as a voice call: cipo =0004.
See also AT command AT#C2.
cmds – Command set (note 1, page 85)
Command set for connection control
0: AT command set (default)
1: X.3 PAD
6: Hot line DTR call
7: Hot line TXD call
10: TA+Configurator