Westermo ID-90 - Manual (Page 55)

55 6607-2204
19 Handling Delete Characters
Defines, what should be sent to the screen when a Character-Delete or
a Line-Delete character is received.
Valid Parameter Values:
0
Nothing
2 Send a <BS><Space><BS>, so that the last character displayed is
deleted.
20 Echo Filter
If parameter 2 is set to 1 (= character echo during data transfer), this
parameter can be used to determine which characters, entered from the
keyboard, will not be echoed to the screen.
Valid Parameter Values:
0
No echo filter, thus echo all characters
1 No echo for <CR>
2 No echo for <LF>
4 No echo for <VT>, <HT>, <FF>
8 No echo for <BEL>, <BS>
16 No echo for <ESC>, <ENQ>
32 No echo for <ACK>, <NAK>, <STX>, <SOH>, <EOT>, <ETB>,
<ETX>
64 No echo for editing characters, those set with the parameters 118, 119,
and 120
128 No echo for <DEL> or any other ASCII control character not listed
above
Note: This parameter is interpreted bitwise, thus any combination of the above
listed values can be combined to form a sum of the desired values
21 Parity handling (Read only)
Handles and displays used parity on asynchronous line.
0: no parity
1: even parity
2: odd parity
3: no parity