Westermo ID-90 - Manual (Page 63)

X.25 D channel rerouting
If the protocol X.25 D channel (prot = 21) is selected an automatic establishment of a B
channel connection can be selected, if the X.25 call using the X.31-D channel is not suc-
cessful.
The B channel connection will be started if
• no successful X.25 connection is established within of a timeout set by command “cato”
in seconds
• an error is reported from X.31 D channel line.
The rerouting will be activated by setting the configuration command “x31rr=1”
(from PAD please enter “exec x31rr=1”).
The ISDN number used for establishment of the B channel connection will be taken from
the table xtab dependent of the entry found in the table.
If the X.25 address meets no entry, the rerouting will not be used.
Example:
1. To enable rerouting for all X25 addresses:
x31rr 1
xtab1 *i04089928392
2. To enable rerouting for the x25 address 45400012345 and 45400012389:
x31rr 1
xtab1 45400012345i04089928392
xtab2 45400012389i04089928392
or
xtab1 454000123*i04089928392
or
xtab1 454000123??i04089928392
63 6607-2204