Westermo RM-115S - Manual (Page 19)

115S Serial I/O Module User Manual
man_115S_1.14.docx Page 19
Figure 2-11: Connection for current source output.
Note:
- The module is configured at the factory for this type of output connection
- To change the input configuration, refer to section 4.5
Figure 2-12: Connection for current sink output.
Note:
- The hardware configuration needs to be changed for this type of output
connection
- To change the hardware configuration, refer to section 4.5
V-
AOT1
AOT2
AGND
115S-13 Module
ALS +24V
PLC
AI+
AI-
V-
AOT1
AOT2
AGND
115S-13 Module
ALS +24V
PLC
AI
COM
+
-
+ -