Accton Technology ES4626 - Manual (Page 184)

184
It is obvious that, the dot1q-tunnel function has got following characteristics:
z Applicable through simple static configuration, no complex configuration or
maintenance to be needed.
z Operators will only have to assign one SPVID for each user, which
increases the number of concurrent supportable users; while the users has
got the ultimate freedom in selecting and managing the VLAN IDs (select
within 1~4094 at users’ will).
z The user network is considerably independent. When the ISP internet is
upgrading their network, the user networks do not have to change their
original configuration.
Detailed description on the application and configuration of dot1q-tunnel of ES4624
will be provided in this section
5.3.2 Dot1q-tunnel Configuration
5.3.2.1 Configuration Task Sequence Of Dot1q-Tunnel
1) Configure the dot1q-tunnel function on the ports
2) Configure the type of protocol (TPID) on the ports
1. Configure the dot1q-tunnel function on the ports
2. Configure the type of protocol (TPID) of the port
5.3.3 Commands for Dot1q-Tunnel Configuration
5.3.3.1 dot1q-tunnel enable
Command: dot1q-tunnel enable
no dot1q-tunnel enable
Command Explanation
Port mode
dot1q-tunnel enable
no dot1q-tunnel enable
Enter/exit the dot1q-tunnel mode on
the ports.
Command Explanation
Port mode
dot1q-tunnel tpid
{8100|9100|9200|<0-65535>}
Configure the type of protocol on the
ports.