Accton Technology ES4626 - Manual (Page 285)

285
（ 5）Configure Router Announce Minimum Interval
Command Description
Interface Configuration Mode
[no] ipv6 nd min-ra-interval
<seconds>
Configure the minimum interval for router
announce. The NO command resumes
default value (200 seconds).
（ 6）Configure Router Announce Maximum Interval
Command Explanation
Interface Configuration Mode
[no] ipv6 nd max-ra-interval
<seconds>
Configure the maximum interval for router
announce. The NO command resumes
default value (600 seconds).
（ 7）Configure prefix announce parameters
Command Explanation
Interface Configuration Mode
[no] ipv6 nd prefix
<ipv6-address/prefix-length>
<valid-lifetime>
<preferred-lifetime> [off-link]
[no-autoconfig]
Configure the address prefix and announce
parameters of router. The NO command
cancels the address prefix of routing
announce.
（ 8）Set Static Neighbor Table Entries
Command Explanation
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
<hardware-address> interface
<interface-type
interface-number>
Set static neighbor table entries, including
neighbor IPv6 address, MAC address and
two-layer port
no ipv6 neighbor <ipv6-address> Delete neighbor table entries
（ 9）Clear Neighbor Table Entries
Command Explanation
Admin Mode
clear ipv6 neighbors
Clear all static neighbor table entries