Accton Technology ES4626 - Manual (Page 419)

419
Parameter: Specifies the name of VPN routing/forwarding instances.
Command Mode:
Any mode
Example: Switch# show ip rip database vrf IPI
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B - BGP
Network Next Hop Metric From If Time
R 10.1.1.0/24 1 Vlan1 00:46
13.4.5.1.6 show ip rip interface
Command: show ip rip interface [<ifname>]
Function:
Show the RIP related messages
Parameter: <ifname>
is the name of the interface to show the messages
Command Mode: Any mode
Example: Switch# show ip rip interface vlan 1
Vlan1 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:10.1.1.1/24
13.4.5.1.7 show ip rip interface vrf
Command: show ip rip interface vrf <vrf-name>[<ifname>]
Function: This command shows RIP interface relevant to VPN routing/forwarding
instances
Parameter: Specifies the name of VPN routing/forwarding instances
<ifname> is the name of the interfaces
Command Mode:
Any mode
Example: Switch# show ip rip interface vrf IPI Vlan1
Ethernet1/1 is up, line protocol is up
Routing Protocol: RIP
VPN Routing/Forwarding: vpnb
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:11.1.1.1/24
Displayed information Explanations