Accton Technology ES4626 - Manual (Page 518)

518
（ 9）Configure the BGP Version
Command Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>} version
<value>
no neighbor {<ip-address> | <TAG>} version
Set the version used by BGP
neighbors; the no neighbor
{<ip-address> | <TAG>}
version command recovers
default setting. Presently only
supporting version 4 th .
Ⅱ． Advanced BGP configuration tasks
1．Use Route Maps to Modify Route
Command Explanation
BGP configuration mode
neighbor { <ip-address> | <TAG> }
route-map <map-name > {in | out}
no neighbor { <ip-address> | <TAG> }
route-map <map-name > {in | out}
Apply a route map to incoming
or outgoing routes; the no
neighbor { <ip-address> |
<TAG> } route-map
<map-name > {in | out}
command cancels the settings
of routing maps.
2．Configure Route Aggregation
Command Explanation
BGP configuration mode
aggregate-address <ip-address/M>
[summary-only] [as-set]
no aggregate-address <ip-address/M>
[summary-only] [as-set]
Create an aggregate entry in the
BGP routing table; the no
aggregate-address
<ip-address/M> [summary-only]
[as-set] command cancels the
aggregate entry.
3．Configure BGP Community Filtering
Command Explanation
BGP configuration mode