Accton Technology ES4626 - Manual (Page 94)

94
Switch#copy ftp:// username:password@2004:1:2:3::6/nos.img nos.img
（ 3）Save the running configuration files
Switch#copy running-config startup-config
Relevant Command: write
2.5.3.2.2.2 copy（TFTP）
Command: copy <source-url> <destination-url> [ascii | binary]
Function: Download files to the TFTP client
Parameter ： <source-url> is the location of the source files or directories to be
copied;<destination-url> is the destination address to which the files or directories to be
copied;forms of <source-url> and <destination-url> vary depending on different
locations of the files or directories. ascii indicates the ASCII standard will be
adopted;binary indicates that the binary system will be adopted in the file transmission
（ default transmission method）.When URL represents an TFTP address, its form should
be: tftp://{<ipaddress>|<ipv6address>|<hostname> }/<filename>,amongst
<ipaddress>|<ipv6address> is the IPv4 or IPv6 address of the TFTP
server/client,<hostname> is the name of the host mapping with the IPv6 address,it does
not support the file download and upload with hosts mapping with IPv4
addresses,<filename> is the name of the TFTP upload/download file.
Special keyword of the filename
Keywords Source or destination addresses
running-config Running configuration files
startup-config Startup configuration files
nos.img System files
nos.rom System startup files
Command Mode: Admin Mode
Usage Guide:
This command supports command line hints,namely if the user can enter
commands in following forms: copy <filename> tftp:// or copy tftp:// <filename> and
press Enter,following hints will be provided by the system：
tftp server ip/ipv6 address[x.x.x.x]/[x:x::x:x]>
tftp filename>
Requesting for TFTP server address, file name
Example:
（ 1）Save images in the FLASH to the TFTP server of 2004:1:2:3::6
Switch#copy nos.img tftp:// 2004:1:2:3::6/ nos.img