Accton Technology ES4626 - Manual (Page 397)

397
address-family ipv4 vrf <vrf-name>
no address-family ipv4 vrf
<vrf-name>
The command configures a RIP address
family on the VRF of the PE router. the no
address-family ipv4 vrf <vrf-name>
command deletes the configured address
family
Address family configuration mode
exit-address-family This command exits the address family mode
13.4.3 Commands for RIP
13.4.3.1 accept-lifetime
Command: accept-lifetime <start-time> {<end-time>| duration<seconds>| infinite}
no accept-lifetime
Function: Use this command to specify a key accept on the key chain as a valid time
period. The “no accept-lifetime” command deletes this configuration.
Parameter: <start-time> parameter specifies the start time of the time period, of which
the form should be:
<start-time>={<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day>
<month> <year>}
<hh:mm:ss> specify the concrete valid time of accept-lifetime in hours, minutes
and second
<day> specifies the date of valid, ranging between 1 -31
<month> specifies the month of valid shown with the first three letters of the
month, such as Jan
<year> specifies the year of valid start, ranging between 1993 - 2035
<end-time>
specifies the due of the time period, of which the form should be:
<end-time>={<hh:mm:ss> <month> <day> <year>|<hh:mm:ss> <day>
<month> <year>}
<hh:mm:ss> specify the concrete valid time of accept-lifetime in hours, minutes
and second
<day> specifies the date of valid, ranging between 1 -31
<month> specifies the month of valid shown with the first three letters of the
month, such as Jan
<year> specifies the year of valid start, ranging between 1993 - 2035
<seconds> the valid period of the key in seconds, ranging between
1-2147483646
Infinite means the key will never be out of date.