5 ipv6 nd ns-interval, 6 ipv6 nd suppress-ra – Accton Technology ES4626 User Manual

Page 289

Advertising
background image

289

no ipv6 nd dad attempts

Function:

Set Neighbor Request Message number sent in succession by interface when

setting Repeat Address Check..

Parameter:<value>

is the Neighbor Request Message number sent in succession by

Repeat Address Check, and the value of <value> must be in 0-10, NO command

restores to default value 1.

Command Mode:

Interface Configuration Mode

Default:

The default request message number is 1

Usage Guide:

When configuring an IPv6 address, it is required to process IPv6 Repeat

Address Check, this command is used to configure the ND message number of Repeat

Address Check to be sent, value being 0 means no Repeat Address Check is executed.

Example:

The Neighbor Request Message number sent in succession by interface when

setting Repeat Address Check is 3..

Switch(Config-if-Vlan1)# ipv6 nd dad attempts 3

9.2.2.3.1.5 ipv6 nd ns-interval

Command:ipv6 nd ns-interval <seconds>

no ipv6 nd ns-interval

Function:

Set the time interval of Neighbor Request Message sent by the interface

Parameter:

parameter <seconds> is the time interval of sending Neighbor Request

Message, <seconds> value must be between 1-3600 seconds, no command restores

the default value 1 second.

Command Mode:

Interface Configuration Mode

Default:

The default Request Message time interval is 1 seconds.

Default:

The value to be set will include the situation in all routing announcement on the

interface. Generally, very short time interval is not recommended.

Example:

Set Vlan1 interface to send out Neighbor Request Message time interval to be

8 seconds.

Switch(Config-if-Vlan1)#ipv6 nd ns-interval 8

9.2.2.3.1.6 ipv6 nd suppress-ra

Command:

[no] ipv6 nd suppress-ra

Function:Prohibit router announcement.

Parameter:

None

Command Mode:

Interface Configuration Mode

Default Situation:

There is not Enable router announcement function.

Usage Guide:

no ipv6 nd suppress-ra command enable router announcement function.

Example:

Enable router announcement function.

Advertising
This manual is related to the following products: