Accton Technology ES4626 - Manual (Page 393)

393
protocols to be introduced in RIP)
Command Explanation
Router configuration mode
default-metric <value>
no default-metric
Sets the default route metric for route to be
introduced; the “no default-metric” command
restores the default setting.
redistribute {kernel |connected|
static| ospf| isis| bgp}
[metric<value>] [route-map<word>]
no redistribute {kernel |connected|
static| ospf| isis| bgp}
[metric<value>] [route-map<word>]
Redistribute the routes distributed in other
routing protocols into the RIP data packet; the
no redistribute {kernel |connected| static|
ospf| isis| bgp} [metric<value>]
[route-map<word>] command cancels the
distributed route of corresponding protocols
default-information originate
no default-information originate
Generate a default route to the RIP protocol;
the no default-information originate
command cancels the feature.
2）Configure interface authentication mode and password
Command Explanation
Interface configuration mode
ip rip authentication mode { text|
md5}
no ip rip authentication mode [text|
md5]
Sets the authentication method; the no ip rip
authentication mode [text| md5] command
cancels the authentication action
ip rip authentication string <text>
no ip rip authentication string
Sets the authentication key; the no ip rip
authentication string command means no
key is needed.
ip rip authentication key
<name-of-chain>
no ip rip authentication key
[<name-of-chain>]
Sets the key chain used in authentication, the
no ip rip authentication key
[<name-of-chain>] command means the key
chain is not used
Global mode
key chain <name-of-chain>
no key chain < name-of-chain >
Enter keychain mode, and configure a key
chain, the no key chain < name-of-chain >
command deletes the key chain
Keychain mode