Accton Technology ES4626 - Manual (Page 766)

766
Parameters:<name> : name of access-list excluding blank or quotation mark, and it must
start with letter, and the length cannot exceed 16 (remark: sensitivity on capital or small
letter.)
Command Mode: Global mode
Default: No named MAC-IP access-list
Usage Guide:After assigning this commands for the first time, only an empty name
access-list is created and no list item included.
Examples: Create an MAC-IP ACL named mac. acl
Switch(Config)# mac-ip-access-list extended macip_acl
Switch(Config-MacIp-Ext-Nacl-macip_acl)#
18.2.2.19 permit | deny( ip extended)
Command: [no] {deny | permit} icmp {{<sIpAddr> <sMask>} | any | {host
<sIpAddr>}} {{<dIpAddr> <dMask>} | any-destination | {host-destination
<dIpAddr>}} [<icmp-type> [<icmp-code>]] [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
[no] {deny | permit} igmp {{<sIpAddr> <sMask>} | any | {host <sIpAddr>}}
{{<dIpAddr> <dMask>} | any-destination | {host-destination <dIpAddr>}}
[<igmp-type>] [precedence <prec>] [tos <tos>][time-range<time-range-name>]
[no] {deny | permit} tcp {{<sIpAddr> <sMask>} | any | {host <sIpAddr>}}
[s-port <sPort>] {{<dIpAddr> <dMask>} | any-destination | {host-destination
<dIpAddr>}} [d-port <dPort>] [ack+fin+psh+rst+urg+syn] [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
[no] {deny | permit} udp {{<sIpAddr> <sMask>} | any | {host <sIpAddr>}}
[s-port <sPort>] {{<dIpAddr> <dMask>} | any-destination | {host-destination
<dIpAddr>}} [d-port <dPort>] [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
[no] {deny | permit} {eigrp | gre | igrp | ipinip | ip | <int>} {{<sIpAddr>
<sMask>} | any | {host <sIpAddr>}} {{<dIpAddr> <dMask>} | any-destination |
{host-destination <dIpAddr>}} [precedence <prec>] [tos
<tos>][time-range<time-range-name>]
Functions: Create a name expansion IP access rule to match specific IP protocol or all
IP protocol;
Parameters: <sIpAddr> is the source IP address, the format is dotted decimal notation;
<sMask > is the reverse mask of source IP, the format is dotted decimal notation;
<dIpAddr> is the destination IP address, the format is dotted decimal notation; <dMask>
is the reverse mask of destination IP, the format is dotted decimal notation, attentive
position o, ignored position 1; <igmp-type>, the type of igmp, 0-15; <icmp-type>, the