Accton Technology ES4626 - Manual (Page 538)

538
13.8.3.29 clear ip bgp dampening
Command:clear ip bgp [<ADDRESS-FAMILY>] dampening
[<ip-address>|<ip-address/M>]
Function: Used for resetting BGP routing dampening
Parameter: <ADDRESS-FAMILY> : address-family, such as “ipv4 unicast”
<ip-address>
: IP address
<ip-address/M> : IP address and mask
Default: None
Command Mode: Admin mode
Usage Guide: It is possible to clear BGP routing dampening messages and state by
different parameters (such as address-family or IPv4 address)
Example:
Switch# clear ip bgp ipv4 unicast dampening
13.8.3.30 clear ip bgp flap-statistics
Command:clear ip bgp [<ADDRESS-FAMILY>] flap-statistics
[<ip-address>|<ip-address/M>]
Function: For resetting BGP routing dampening statistics messages.
Parameter: <ADDRESS-FAMILY> : address-family such as “ipv4 unicast”
<ip-address/M>
: IP address and mask
Default: None
Command Mode: Admin mode
Usage Guide: It is possible to clear BGP routing dampening statistic messages and state
by different parameters (such as address-family or IPv4 address)
Example:
Switch#clear ip bgp ipv4 unicast flap-statistics
13.8.3.31 distance
Command: distance <1-255> <ip-address/M> [<WORD>]
no distance <1-255> <ip-address/M> [<WORD>]
Function: Set the manage distance of the routing prefix. The “no distance <1-255>
<ip-address/M> [<WORD>] ” command restores to the default value
Parameter: <1-255> : Manage distance
<ip-address/M> : Routing prefix
<WORD>
: Access-list name
Default: Not set
Command Mode: BGP route mode
Usage Guide: Set the manage distance for specified BGP route as the path selecting