Accton Technology ES4626 - Manual (Page 519)

519
neighbor {<ip-address> | <TAG>}
send-community
no neighbor {<ip-address> | <TAG>}
send-community
Allow the routing updates with
community attributes sending to
BGP neighbors; the no neighbor
{<ip-address> | <TAG>}
send-community command
enables the route without
community attributes.
4．Configure BGP Confederation
Command Explanation
BGP configuration mode
bgp confederation identifier <as-id>
no bgp confederation identifier <as-id>
Configure a BGP AS
confederation identifier; the
no bgp confederation
identifier <as-id>
command
deletes the BGP AS
confederation identifier
bgp confederation peers <as-id> [<as-id>..]
no bgp confederation peers <as-id> [<as-id>..]
Configure the AS affiliated to
the AS confederation; the no
bgp confederation peers
<as-id> [<as-id>..] command
deletes the AS from the AS
confederation.
5．Configure a Route Reflector
（1） The following commands can be used to configure route reflector and its
clients.
Command Explanation
BGP configuration mode
neighbor <ip-address> route-reflector-client
no neighbor <ip-address> route-reflector-client
Configure the current switch as
route reflector and specify a
client. the no neighbor
<ip-address>
route-reflector-client
commands format deletes a
client.
（2） If there are more than one route reflectors in the cluster, the following