2 ftp/tftp configuration, 1 ftp/tftp configuration task list – Accton Technology ES4626 User Manual
Page 91
91
up configuration file, which is called configuration save. To prevent illicit file upload and
easier configuration, ES4624-SFP/ES4626-SFP switch mandates the name of running
configuration file to be running-config.
Factory configuration file:
The configuration file shipped with
ES4624-SFP/ES4626-SFP switch in the name of factory-config. Run set default and
write
, and restart the switch, factory configuration file will be loaded to overwrite current
start up configuration file.
2.5.3.2 FTP/TFTP Configuration
The configurations of ES4624-SFP/ES4626-SFP switch as FTP and TFTP clients
are almost the same, so the configuration procedures for FTP and TFTP are described
together in this manual.
2.5.3.2.1 FTP/TFTP Configuration Task List
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（
1） For FTP client, server file list can be checked.
2. FTP server configuration
（
1） Start FTP server
（
2） Configure FTP login username and password
（
3） Modify FTP server connection idle time
（
4） Shut down FTP server
3. TFTP server configuration
（
1） Start TFTP server
（
2） Configure TFTP server connection idle time
（
3） Configure retransmission times before timeout for packets without
acknowledgement
（
4） Shut down TFTP server
1. FTP/TFTP client configuration
（
1）FTP/TFTP client upload/download file
Command Explanation
Admin Mode
copy <source-url> <destination-url>
[ascii | binary]
FTP/TFTP client upload/download file
（
2）For FTP client, server file list can be checked.
Global Mode