H3C Technologies H3C S12500-X Series Switches User Manual

Page 205

Advertising
background image

194

[PE2-bgp-vpnv4] peer 1.1.1.9 enable

[PE2-bgp-vpnv4] quit

[PE2-bgp] quit

# Configure OSPF on PE 2.

[PE2]ospf 1

[PE2-ospf-1]area 0

[PE2-ospf-1-area-0.0.0.0]network 2.2.2.9 0.0.0.0

[PE2-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255

[PE2-ospf-1-area-0.0.0.0]quit

[PE2-ospf-1]quit

3.

Configure PEs to allow CE access:
# Configure PE 1.

[PE1] ip vpn-instance vpn1

[PE1-vpn-instance-vpn1] route-distinguisher 100:1

[PE1-vpn-instance-vpn1] vpn-target 1:1

[PE1-vpn-instance-vpn1] quit

[PE1] interface vlan-interface 11

[PE1-Vlan-interface11] ip binding vpn-instance vpn1

[PE1-Vlan-interface11] ip address 100.1.1.2 24

[PE1-Vlan-interface11] quit

[PE1] ospf 100 vpn-instance vpn1

[PE1-ospf-100] domain-id 10

[PE1-ospf-100] area 1

[PE1-ospf-100-area-0.0.0.1] network 100.1.1.0 0.0.0.255

[PE1-ospf-100-area-0.0.0.1] quit

[PE1-ospf-100] quit

[PE2] bgp 100

[PE1-bgp] ip vpn-instance vpn1

[PE1-bgp-vpn1] address-family ipv4 unicast

[PE1-bgp-ipv4-vpn1] import-route ospf 100

[PE1-bgp-ipv4-vpn1] import-route direct

[PE1-bgp-ipv4-vpn1] quit

[PE1-bgp-vpn1] quit

[PE1-bgp] quit

# Configure PE 2.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 100:2

[PE2-vpn-instance-vpn1] vpn-target 1:1

[PE2-vpn-instance-vpn1] quit

[PE2] interface vlan-interface 11

[PE2-Vlan-interface11] ip binding vpn-instance vpn1

[PE2-Vlan-interface11] ip address 120.1.1.2 24

[PE2-Vlan-interface11] quit

[PE2] ospf 100 vpn-instance vpn1

[PE2-ospf-100] domain-id 10

[PE2-ospf-100] area 1

[PE2-ospf-100-area-0.0.0.1] network 120.1.1.0 0.0.0.255

[PE2-ospf-100-area-0.0.0.1] quit

Advertising
This manual is related to the following products:

H3C S5560 Series Switches, H3C S9800 Series Switches, H3C SecPath F5020, H3C SecPath F5040, H3C VMSG VFW1000, H3C S6800 Series Switches, H3C S5800 Series Switches, H3C S5820X Series Switches, H3C S5830V2 Series Switches

Popular Brands
Popular manuals