HEIDENHAIN iTNC 530 (340 49x-04) ISO programming - Manual (Page 56)

56 1 Introduction
1
.4 Stat
us Displa
ys
Overview
After switch-on, the TNC displays the Overview status form, provided
that you have selected the PROGRAM+STATUS screen layout (or
POSITION + STATUS). The overview form contains a summary of the
most important status information, which you can also find on the
various detail forms.
General program information (PGM tab)
Soft key Meaning
Position display in up to 5 axes
Tool information
Active M functions
Active coordinate transformations
Active subprogram
Active program section repeat
Program called with PGM CALL
Current machining time
Name of the active main program
Soft key Meaning
No direct
selection
possible Name of the active main program
Circle center CC (pole)
Dwell time counter
Machining time
Current machining time in percent
Current time
Current/programmed contouring feed rate
Active programs