HEIDENHAIN iTNC 530 (340 49x-04) ISO programming - Manual (Page 8)

8
Feature content level (upgrade functions)
Along with software options, significant further improvements of the
TNC software are managed via the Feature Content Level upgrade
functions. Functions subject to the FCL are not available simply by
updating the software on your TNC.
Upgrade functions are identified in the manual with FCL n, where n
indicates the sequential number of the feature content level.
You can purchase a code number in order to permanently enable the
FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
All upgrade functions are available to you without
surcharge when you receive a new machine.
FCL 4 functions Description
Graphical depiction of the protected
space when DCM collision monitoring is
active Page 96
Handwheel superimposition in stopped
condition when DCM collision
monitoring is active Page 278
3-D rotation (set-up compensation) Machine Manual
FCL 3 functions Description
Touch probe cycle for 3-D probing Touch Probe Cycles
User’s Manual
Touch probe cycles for automatic datum
setting using the center point of a slot/
ridge Touch Probe Cycles
User’s Manual
Feed-rate reduction for the machining of
contour pockets with the tool being in
full contact with the workpiece Page 405
PLANE function: Entry of axis angle Page 500
User documentation as a context-
sensitive help system Page 167
smarT.NC: Programming of smarT.NC
and machining can be carried out
simultaneously User’s Manual for
Conversational
Programming
smarT.NC: Contour pocket on point
pattern smarT.NC Pilot
smarT.NC: Preview of contour
programs in the file manager smarT.NC Pilot