SMA SB 240-US-10 - Manual (Page 15)

SMA America, LLC
3 Getting Started
User Manual SPortalMGate-US-BA-en-10 15
4. Follow the hyperlink in the confirmation e-mail within 24 hours.
☑ Sunny Portal opens a separate window and confirms successful registration.
5. Select [Next].
☑ The Select Plant page opens.
Registering as an Existing User in Sunny Portal
An additional plant is added to your plant in Sunny Portal: your micro inverter plant.
Requirement:
☐ You must already be registered in Sunny Portal.
Procedure:
1. Activate the I am already registered in the Sunny Portal option.
2. Enter the e-mail address and the Sunny Portal password in the E-mail address and Password
fields.
3. Select [Next].
☑ The Select Plant page opens.
Identifying Devices in Sunny Portal
1. Select the option Create new plant and enter a plant name (e.g. My micro inverter plant)
in the Plant Name field.
2. Enter the plant password for the user role Installer of your plant in the Plant Password field.
If you have not yet changed the plant password for the user role Installer, the standard plant
password 1111 is set. In such cases, you must now assign a new plant password.
3. Enter the plant password again in the Repeat password field.
4. Select [Next].
☑ The Select devices page opens.
5. Enter the PIC and RID of the Sunny Multigate in the PIC and RID fields.
6. Select [Identify].
☑ The Plant Setup Assistant adopts the data entered and compiles it into a list.
7. To select up to three additional Sunny Multigates, enter the PIC and RID of another
Sunny Multigate and select [Identify]. A maximum of four Sunny Multigates form a micro
inverter plant. If you would like to register more Sunny Multigates, you have to create another
micro inverter plant after having completed the registration.
8. Select [Next].
☑ The page Micro Inverter Detection opens and the number of the micro inverters found will
be displayed below the Sunny Multigate.
9. In order to display the serial numbers of the micro inverters found, click onto the number of the
micro inverters found.
10. Select [Next].
☑ The Configure Module Groups page opens.