SMA SB 240-US-10 - Manual (Page 40)

6 Plant Monitoring
SMA America, LLC
40 SPortalMGate-US-BA-en-10 User Manual
6.3.4 Retroactively Generating a Report
You can create a report for a specific date in the past.
Requirement:
☐ You must have the user role Installer or Plant administrator (see Section 10.1).
Procedure:
1. Select Configuration > Report Configuration in the page and drop-down menu.
2. Select the desired report in the Report Configuration drop-down list.
3. In the Report Date field in the Regenerate Report Manually area, enter the date for which
you wish to create a report. Tip: click the calendar icon and select a date in the calendar.
4. Select [Generate].
☑ A message that the report has been successfully sent is displayed.
6.4 Overview of the Plant Monitoring Page
The page "My micro inverter plant" > Plant Monitoring consists of the
Communication Monitoring and Inverter Comparison areas
Communication Monitoring Area
Communication monitoring shows the current communication status between all Sunny Multigates
and Sunny Portal. If a Sunny Multigate cannot be reached, Sunny Portal informs you by e-mail
(see Section 6.5 "Setting Communication Monitoring", page 41).
The communication monitoring status is displayed in Sunny Portal with the following icons:
Icon Status Explanation
Deactivated Communication monitoring is not set (see Section 6.5 "Setting
Communication Monitoring", page 41).
OK The communication with all Sunny Multigates is faultless.
The time of last contact is displayed.
Error The communication with all Sunny Multigates is interrupted.
Use the Details hyperlink to access detailed information on the
time of last contact.
The error is displayed until it is corrected.
If the error is not corrected, Sunny Portal sends another e-mail
reminder up to three days after the first e-mail was sent.
E-mail reminder is
activated Clicking the bell icon stops the sending of reminder e-mails for
the current error.
If a new error occurs, the e-mail reminder is sent again.