SMA SB 240-US-10 - Manual (Page 58)

9 Plant Management
SMA America, LLC
58 SPortalMGate-US-BA-en-10 User Manual
9 Plant Management
9.1 Adding a Sunny Multigate
A micro inverter plant in Sunny Portal can consist of up to four Sunny Multigates. If your micro inverter
plant in Sunny Portal already consists of four Sunny Multigates, you must create a new plant in
Sunny Portal (see Section 3.1 "Registering Sunny WebBox in Sunny Portal", page 14).
Requirements:
☐ The new Sunny Multigate must be commissioned in your plant.
☐ The new Sunny Multigate must be connected to the router/network switch and connected to the
Internet (see installation manual of the Sunny Multigate).
☐ The PIC and RID of the Sunny Multigate must be available (see type label or label supplied with
the Sunny Multigate).
☐ The serial number of the inverters must be available as well as the following data of the
connected PV module: manufacturer, type, tilt and azimuth angle.
☐ You must have the user role Installer or Plant administrator (see Section 10.1).
Procedure:
1. Go to www.SunnyPortal.com.
2. Select [Plant Setup Assistant].
☑ The Plant Setup Assistant opens.
3. Select [Next].
☑ The User Registration page opens.
4. Enter the e-mail address and the Sunny Portal password in the E-mail address and
Password fields.
5. Select [Next].
☑ The Select Plant page opens.
6. Select the option Add or replace devices.
7. In the row for the plant and the Option column, select
.
☑ The Select devices page opens.
8. Enter the PIC and RID of a new Sunny Multigate in the PIC and RID fields.
9. Select [Identify].
10. To add other Sunny Multigate, enter the PIC and RID of another Sunny Multigate and select
[Identify].
11. Select [Next].
☑ The page Micro Inverter Detection opens and the number of the inverters found will be
displayed below the Sunny Multigate.
12. In order to display the serial numbers of the micro inverters found, click onto the number of the
micro inverters found.