SMA SB 240-US-10 - Manual (Page 56)

8 Device Settings
SMA America, LLC
56 SPortalMGate-US-BA-en-10 User Manual
8.3 Calling up the Device Parameters
The parameters of a device are described in the respective device manual. You can only read the
device parameters on this page, you cannot change them. If you want to change the parameters, use
the Sunny Explorer software (see Sunny Explorer help). You can obtain Sunny Explorer free of charge
from the download area at www.SMA-Solar.com. Sunny Explorer is compatible with micro inverter
plants from Sunny Explorer software version 1.06.
Requirement:
☐ You must have the user role Installer or Plant administrator (see Section 10.1).
Procedure:
1. Select Configuration > Device Overview in the page and drop-down menu.
2. In the row for the device and the Parameters column, select
.
☑ You can find the parameters in the parameter list.
3. To display changes to the parameters, select in the History column.
8.4 Entering Line Conductors
Sunny Portal can display the line conductors to which each inverter is connected in the device
properties. In order to display the line conductors, you must enter them first.
Requirement:
☐ You must have the user role Installer or Plant administrator (see Section 10.1).
Procedure:
1. Call up the inverter properties (see Section 8.2).
2. Select [Edit].
☑ The menu for setting the device properties opens.
3. In the Line conductor area, activate the checkbox of the line conductor to which the inverter is
connected.
4. Select [Save].